SERVICE HOTLINE:86-513-81188826



X-axis travel 230 (* 205 + 25) mm
Z-axis travel 550 (* 800 / 1,040) mm
X / Z guidance box way

Put in bed Ø600 mm
Swing Ø400mm on saddle
maximum. Turning diameter Ø400mm
Drawer capacity Ø76mm
maximum. Turning length 500 (* 750 / 1,000) mm

Speed 30 ~ 3,500 rpm
Nose A2-8
Power chuck system 10 (* 12) inches
Hole diameter Ø76 (Ø92) mm
Engine 25 HP
Feed rate

Cutting feedrate X Cutting feedrate: 0~10,000
Z Cutting feedrate: 0~10,000 M / min

Tool change type SERVO
Number of tools 12 (* 10)
Rotary shank size 25x25 mm
The maximum diameter rod Ø40 (* Ø50) mm
Power Tools N / A
Power Tools Motor N / A
Power Tools Speed N / A

Tailstock body travel 830 (* 580 / 1,080) mm
Quil travel 100 mm
Duvet 5 MT
Down diameter Ø85 mm

X-axis travel 20 M / min
Z axis travel 24 M / min
X cutting feed rate 0 ~ 10M
Z cutting feed speed 0 ~ 10M
Tank capacity

50 liters of liquid
Hydraulic motor 3 HP
Equipment requirements

Electricity demand 30 KVA
Machine size

Net weight 4,800 (* 5,300 / 5,800) Kgs
Length 2,750 (* 3,000 / 3,550) mm
Height 1800 mm
Width 1,860 (* 1,860 / 1,950) mm

   The one-piece tilted bed structure provides a stable base, low center and high rigidity.
   Box design with thicker riders allows no conversion.
   The machine is made of Meehanite cast iron. Strain relief structure with long-term static and dynamic accuracy of the metal stability and deformation fee characteristics.
   Each contact surface is precisely hand scraped to improve the overall flatness and improve the geometric accuracy.
   The cast design guided around the pressure current maintains a longer service life.
   With high-quality, high-precision linear guide.
   Fast feed rates of 20 and 24 m / min for the X and Z axes ensure efficient machining.
   High-precision C3 class player X, Z axis Ø32mm, Ø40mm.
   Direct drive coupling experiments in the actual pre-tension test to ensure that the shaft positioning accuracy.
   Hydraulic tailstock stroke can be controlled by NC program.
   Tailstock sleeve thrust can be adjusted from the front of the machine.
Manufacturers reserve the right to modify designs, specifications, mechanisms, etc. to improve machine performance. Specifications are subject to change without notice.

Copyright © 2019   Nantong YIJI Machinery Co., Ltd. all rights reserved